Show Outer Well Unlock Warning
When enabled, the user will be warned when attempting to unlock the outer wells on the UI when using a multiwell plate.
Default: On
Clean Objective Shutdown Reminder
When enabled, you will be prompted to clean the objective if you attempt to shut down Fusion while an Oil Objective is selected.
Default: On
Incubator Offset Value
Specify an offset value (in microns) to apply to all Z movement when using an incubator.
Default: 0
Perform LED Light Intensity Calibration
Perform LED Light Intensity during Focus Stabilisation. After completion, this option will be turned off.
Default: Off